WAT95: Watt Transducer
WAT95 "WISCO" Watt Transducer
- High accuracy
- Long term stability
- Time-Division Multiplication principle
|
Calibration watt of rated output |
||||||
|
Connection |
V=110V |
V=220V |
V=380V |
|||
|
|
I=1A |
I=5A |
I=1A |
I=5A |
I=1A |
I=5A |
|
Single Phase |
100W |
500W |
200W |
1000W |
- |
- |
|
3phase,3wire |
200W |
1000W |
400W |
2000W |
600W |
3000W |
|
3phase,4wire |
200W |
1000W |
400W |
2000W |
600W |
3000W |
|
Note. V= Line voltage Equation to calculated measuring range |
Watt Transducers WAT95 are used to convert single or three phaseunbalance load active power into a proportional load independent DC. Output. Based fully on electronic Time-Division Multiplication measuring principle, the true power of a network with any power factor range are linearly produced by Watt Transducer output.
Specifications
|
Input |
||||
| Number of channel |
: | 3 Channel |
||
| Input type |
: | Current, Voltage (1 phase,3 phase 3 wire, 3 phase 4 wire) |
||
| Input range |
: | Current (1, 5 A), Accuracy Class: 0.5 |
||
| : | Voltage (110, 220, 380 VAC (Line voltage for 3 phase) |
|||
| Power Consumption |
: | < 0.2 VA for input current, < 0.4 VA for voltage input |
||
| Frequency |
: |
50 Hz.
|
||
|
Analog Output |
||||
| Number of Channel |
: | 1 Channel |
||
| Output Type |
: | Current, Voltage |
||
| Output Range |
: | Current Max 0 to 1 mA (Load Resistance 10 KΩ) |
||
| Current Max 4 to 20 mA (Load Resistance 600 Ω) |
||||
| Voltage Min 0 to 10 mVDC (Load Resistance 500 Ω) |
||||
| Voltage Min 0 to 100 mVDC (Load Resistance 500 Ω) |
||||
| Voltage Min 0 to 1 VDC (Load Resistance 500 Ω) |
||||
| Voltage Min 0 to 5 VDC (Load Resistance 1 KΩ) |
||||
| Voltage Min 1 to 5 VDC (Load Resistance 1 KΩ) |
||||
| Voltage Min 0 to 10 VDC (Load Resistance 2 KΩ) |
||||
| Linearity |
: | < ± 0.5 % of span |
||
|
Power Requirements |
||||
| Power Supply |
: | 110, 220 VAC |
||
|
|
||||
| Operating Temperature |
: | 0 to 55 °C |
||
| Operating Humidity |
: | 5 to 95 %RH |
||
| Storage Temperature |
: | 0 to 70 °C |
||
|
Physical Characteristics |
||||
| Dimension |
: | W132 x H132 x D162 mm. |
||
| Mounting |
: | Wall Mount |
||
| Wiring |
: |
Screw Terminals
|
||
| Protection |
: | IP20 |
||
|
Warranty |
||||
| Warranty Period |
: | 5 Year |
Contact Us
KDN AUTOMATION AND SERVICE CO.,LTD.
Tel : 02-023-3038, 082-550-3096
Line official : kdnautomation
E-mail: kdnautomation@gmail.com
