CT195: Current Transducer (3 phase)
CT195 "WISCO" Current Transducer (3 phase)
- Current Input 0-1 Aac, 0-5 Aac
- Analog Output 4-20 mA, 0-5 VDC, 0-10 VDC
Current Transducer CT195 is designed for converting 3 phase sinusoidal alternating current into a load independent DC output signal proportional to the measured RMS. input values.
Specifications
|
Input |
||||
| Number of channel |
: | 3 Channel |
||
| Input type |
: | Current (3 Phase) |
||
| Input range |
: | 0 to 1, 0 to 5 Aac |
||
| : | (Overrange 120% Continuously,200% for 10 sec) |
|||
| Input loss |
: |
1 VA Max.
|
||
|
Analog Output |
||||
| Number of Channel |
: | 3 Channel |
||
| Output Type |
: | Current, Voltage |
||
| Output Range |
: | Current Max 0 to 1 mA (Load Resistance 10 KΩ) |
||
| Current Max 0 to 5 mA (Load Resistance 2 KΩ) |
||||
| Current Max 0 to 10 mA (Load Resistance 1 KΩ) |
||||
| Current Max 0 to 20 mA (Load Resistance 600 Ω) |
||||
| Current Max 4 to 20 mA (Load Resistance 600 Ω) |
||||
| Voltage Min 0 to 10 mVDC (Load Resistance 500 Ω) |
||||
| Voltage Min 0 to 100 mVDC (Load Resistance 500 Ω) |
||||
| Voltage Min 0 to 1 VDC (Load Resistance 500 Ω) |
||||
| Voltage Min 0 to 5 VDC (Load Resistance 1 KΩ) |
||||
| Voltage Min 1 to 5 VDC (Load Resistance 1 KΩ) |
||||
| Voltage Min 0 to 10 VDC (Load Resistance 2 KΩ) |
||||
| Linearity |
: | ± 0.5 % of span |
||
|
Power Requirements |
||||
| Power Supply |
: | 110, 220 VAC |
||
|
Environmental Limits |
||||
| Operating Temperature |
: | 0 to 55 °C |
||
| Operating Humidity |
: | 5 to 95 %RH |
||
| Storage Temperature |
: | 0 to 70 °C |
||
|
Physical Characteristics |
||||
| Dimension |
: | W132 x H132 x D162 mm. |
||
| Mounting |
: | Wall Mount |
||
| Wiring |
: |
Screw Terminals
|
||
|
Warranty |
||||
| Warranty Period |
: | 5 Year |
Contact Us
KDN AUTOMATION AND SERVICE CO.,LTD.
Tel : 02-023-3038, 082-550-3096
Line official : kdnautomation
E-mail: kdnautomation@gmail.com
